You are not logged in.
Pages: 1
Okay, so it's fair to say that i've done more than my fair share of modding this engine and i've not run into any problems until now..
I've tried to implement a depth of field shader in the game and so far i've had no luck, the code is flawless and runs on all GLSL programs except this.. so what is it i'm doing wrong?
*/
uniform sampler2D bgl_RenderedTexture;
uniform sampler2D bgl_DepthTexture;
uniform float bgl_RenderedTextureWidth;
uniform float bgl_RenderedTextureHeight;
#define PI 3.14159265
float width = bgl_RenderedTextureWidth; //texture width
float height = bgl_RenderedTextureHeight; //texture height
vec2 texel = vec2(1.0/width,1.0/height);
//uniform variables from external script
uniform float focalDepth; //focal distance value in meters, but you may use autofocus option below
uniform float focalLength; //focal length in mm
uniform float fstop; //f-stop value
uniform bool showFocus; //show debug focus point and focal range (red = focal point, green = focal range)
/*
make sure that these two values are the same for your camera, otherwise distances will be wrong.
*/
float znear = 0.1; //camera clipping start
float zfar = 100.0; //camera clipping end
//------------------------------------------
//user variables
int samples = 3; //samples on the first ring
int rings = 3; //ring count
bool manualdof = false; //manual dof calculation
float ndofstart = 1.0; //near dof blur start
float ndofdist = 2.0; //near dof blur falloff distance
float fdofstart = 1.0; //far dof blur start
float fdofdist = 3.0; //far dof blur falloff distance
float CoC = 0.03;//circle of confusion size in mm (35mm film = 0.03mm)
bool vignetting = true; //use optical lens vignetting?
float vignout = 1.3; //vignetting outer border
float vignin = 0.0; //vignetting inner border
float vignfade = 22.0; //f-stops till vignete fades
bool autofocus = false; //use autofocus in shader? disable if you use external focalDepth value
vec2 focus = vec2(0.5,0.5); // autofocus point on screen (0.0,0.0 - left lower corner, 1.0,1.0 - upper right)
float maxblur = 1.0; //clamp value of max blur (0.0 = no blur,1.0 default)
float threshold = 0.5; //highlight threshold;
float gain = 2.0; //highlight gain;
float bias = 0.5; //bokeh edge bias
float fringe = 0.7; //bokeh chromatic aberration/fringing
bool noise = true; //use noise instead of pattern for sample dithering
float namount = 0.0001; //dither amount
bool depthblur = false; //blur the depth buffer?
float dbsize = 1.25; //depthblursize
/*
next part is experimental
not looking good with small sample and ring count
looks okay starting from samples = 4, rings = 4
*/
bool pentagon = false; //use pentagon as bokeh shape?
float feather = 0.4; //pentagon shape feather
//------------------------------------------
float penta(vec2 coords) //pentagonal shape
{
float scale = float(rings) - 1.3;
vec4 HS0 = vec4( 1.0, 0.0, 0.0, 1.0);
vec4 HS1 = vec4( 0.309016994, 0.951056516, 0.0, 1.0);
vec4 HS2 = vec4(-0.809016994, 0.587785252, 0.0, 1.0);
vec4 HS3 = vec4(-0.809016994,-0.587785252, 0.0, 1.0);
vec4 HS4 = vec4( 0.309016994,-0.951056516, 0.0, 1.0);
vec4 HS5 = vec4( 0.0 ,0.0 , 1.0, 1.0);
vec4 one = vec4( 1.0 );
vec4 P = vec4((coords),vec2(scale, scale));
vec4 dist = vec4(0.0);
float inorout = -4.0;
dist.x = dot( P, HS0 );
dist.y = dot( P, HS1 );
dist.z = dot( P, HS2 );
dist.w = dot( P, HS3 );
dist = smoothstep( -feather, feather, dist );
inorout += dot( dist, one );
dist.x = dot( P, HS4 );
dist.y = HS5.w - abs( P.z );
dist = smoothstep( -feather, feather, dist );
inorout += dist.x;
return clamp( inorout, 0.0, 1.0 );
}
float bdepth(vec2 coords) //blurring depth
{
float d = 0.0;
float kernel[9];
vec2 offset[9];
vec2 wh = vec2(texel.x, texel.y) * dbsize;
offset[0] = vec2(-wh.x,-wh.y);
offset[1] = vec2( 0.0, -wh.y);
offset[2] = vec2( wh.x -wh.y);
offset[3] = vec2(-wh.x, 0.0);
offset[4] = vec2( 0.0, 0.0);
offset[5] = vec2( wh.x, 0.0);
offset[6] = vec2(-wh.x, wh.y);
offset[7] = vec2( 0.0, wh.y);
offset[8] = vec2( wh.x, wh.y);
kernel[0] = 1.0/16.0; kernel[1] = 2.0/16.0; kernel[2] = 1.0/16.0;
kernel[3] = 2.0/16.0; kernel[4] = 4.0/16.0; kernel[5] = 2.0/16.0;
kernel[6] = 1.0/16.0; kernel[7] = 2.0/16.0; kernel[8] = 1.0/16.0;
for( int i=0; i<9; i++ )
{
float tmp = texture2D(bgl_DepthTexture, coords + offset[i]).r;
d += tmp * kernel[i];
}
return d;
}
vec3 color(vec2 coords,float blur) //processing the sample
{
vec3 col = vec3(0.0);
col.r = texture2D(bgl_RenderedTexture,coords + vec2(0.0,1.0)*texel*fringe*blur).r;
col.g = texture2D(bgl_RenderedTexture,coords + vec2(-0.866,-0.5)*texel*fringe*blur).g;
col.b = texture2D(bgl_RenderedTexture,coords + vec2(0.866,-0.5)*texel*fringe*blur).b;
vec3 lumcoeff = vec3(0.299,0.587,0.114);
float lum = dot(col.rgb, lumcoeff);
float thresh = max((lum-threshold)*gain, 0.0);
return col+mix(vec3(0.0),col,thresh*blur);
}
vec2 rand(vec2 coord) //generating noise/pattern texture for dithering
{
float noiseX = ((fract(1.0-coord.s*(width/2.0))*0.25)+(fract(coord.t*(height/2.0))*0.75))*2.0-1.0;
float noiseY = ((fract(1.0-coord.s*(width/2.0))*0.75)+(fract(coord.t*(height/2.0))*0.25))*2.0-1.0;
if (noise)
{
noiseX = clamp(fract(sin(dot(coord ,vec2(12.9898,78.233))) * 43758.5453),0.0,1.0)*2.0-1.0;
noiseY = clamp(fract(sin(dot(coord ,vec2(12.9898,78.233)*2.0)) * 43758.5453),0.0,1.0)*2.0-1.0;
}
return vec2(noiseX,noiseY);
}
vec3 debugFocus(vec3 col, float blur, float depth)
{
float edge = 0.002*depth; //distance based edge smoothing
float m = clamp(smoothstep(0.0,edge,blur),0.0,1.0);
float e = clamp(smoothstep(1.0-edge,1.0,blur),0.0,1.0);
col = mix(col,vec3(1.0,0.5,0.0),(1.0-m)*0.6);
col = mix(col,vec3(0.0,0.5,1.0),((1.0-e)-(1.0-m))*0.2);
return col;
}
float linearize(float depth)
{
return -zfar * znear / (depth * (zfar - znear) - zfar);
}
float vignette()
{
float dist = distance(gl_TexCoord[3].xy, vec2(0.5,0.5));
dist = smoothstep(vignout+(fstop/vignfade), vignin+(fstop/vignfade), dist);
return clamp(dist,0.0,1.0);
}
void main()
{
//scene depth calculation
float depth = linearize(texture2D(bgl_DepthTexture,gl_TexCoord[0].xy).x);
if (depthblur)
{
depth = linearize(bdepth(gl_TexCoord[0].xy));
}
//focal plane calculation
float fDepth = focalDepth;
if (autofocus)
{
fDepth = linearize(texture2D(bgl_DepthTexture,focus).x);
}
//dof blur factor calculation
float blur = 0.0;
if (manualdof)
{
float a = depth-fDepth; //focal plane
float b = (a-fdofstart)/fdofdist; //far DoF
float c = (-a-ndofstart)/ndofdist; //near Dof
blur = (a>0.0)?b:c;
}
else
{
float f = focalLength; //focal length in mm
float d = fDepth*1000.0; //focal plane in mm
float o = depth*1000.0; //depth in mm
float a = (o*f)/(o-f);
float b = (d*f)/(d-f);
float c = (d-f)/(d*fstop*CoC);
blur = abs(a-b)*c;
}
blur = clamp(blur,0.0,1.0);
// calculation of pattern for ditering
vec2 noise = rand(gl_TexCoord[0].xy)*namount*blur;
// getting blur x and y step factor
float w = (1.0/width)*blur*maxblur+noise.x;
float h = (1.0/height)*blur*maxblur+noise.y;
// calculation of final color
vec3 col = vec3(0.0);
if(blur < 0.05) //some optimization thingy
{
col = texture2D(bgl_RenderedTexture, gl_TexCoord[0].xy).rgb;
}
else
{
col = texture2D(bgl_RenderedTexture, gl_TexCoord[0].xy).rgb;
float s = 1.0;
int ringsamples;
for (int i = 1; i <= rings; i += 1)
{
ringsamples = i * samples;
for (int j = 0 ; j < ringsamples ; j += 1)
{
float step = PI*2.0 / float(ringsamples);
float pw = (cos(float(j)*step)*float(i));
float ph = (sin(float(j)*step)*float(i));
float p = 1.0;
if (pentagon)
{
p = penta(vec2(pw,ph));
}
col += color(gl_TexCoord[0].xy + vec2(pw*w,ph*h),blur)*mix(1.0,(float(i))/(float(rings)),bias)*p;
s += 1.0*mix(1.0,(float(i))/(float(rings)),bias)*p;
}
}
col /= s; //divide by sample count
}
if (showFocus)
{
col = debugFocus(col, blur, depth);
}
if (vignetting)
{
col *= vignette();
}
gl_FragColor.rgb = col;
gl_FragColor.a = 1.0;
}
Offline
uniform sampler2D bgl_RenderedTexture; uniform sampler2D bgl_DepthTexture; uniform float bgl_RenderedTextureWidth; uniform float bgl_RenderedTextureHeight;
Seems like the game has to pass those thingies to the shader. Those variables would need to be hardcoded.
When a variable is prefixed with "uniform" it means the shader is supposed to retrieve some data from CPU.
Offline
Did you test with games that use deferred rendering? Remember that Tesseract uses deferred rendering.
Offline
i'll have a look further into it because its still not working, thanks for your help :3
Offline
I already told you why this isn't working.
Last edited by ImNotQ009 (2014-09-17 13:49:57)
Offline
I already told you why this isn't working.
i know you have and ive altered and its still not working, so i've nulled it until i can figure it out :3
Offline
Pages: 1